View M54HC4351_170624.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

M54HC4351/52/53 M74HC4351/52/53
ANALOG MULTIPLEXER/DEMULTIPLEXER WITH ADDRESS LATCH: SINGLE 8 CHANNEL, DUAL 4 CHANNEL, TRIPLE 2 CHANNEL
.LOGI .WI .LOW" .WI .FASTSWI .LOWCROSSTALKBETWEENSWI .HI .LOWSI .HI .LOWPOWERDI
C LEVEL TRANSLATION TO ENABLE 5V LOGIC SIGNAL TO COMMUNICATE WITH 5V ANALOG SIGNAL DE OPERATING VOLTAGE RANGE (VCC - VEE) 2V TO 12V ON" RESISTANCE: 70 TYP. (VCC - VEE = 4.5 V) 50 TYP. (VCC - VEE = 9 V) DE ANALOG INPUT VOLTAGE RANGE: 6V TCHING TCHES GH ON/OFF OUTPUT VOLTAGE RATIO NE WAVE DISTORTION: 0.02% (TYP.) AT VCC - VEE = 9 V GH NOISE IMMUNITY VNIH = VNIL = 28% VCC (MIN.) SSIPATION ICC = 4 A (MAX) AT TA = 25 oC
B1R (Plastic Package)
F1R (Ceramic Package)
M1R C1R (Micro Package) (Chip Carrier) ORDER CODES : M54HCXXXXF1R M74HCXXXXM1R M74HCXXXXB1R M74HCXXXXC1R
DESCRIPTION These devices are analog multiplexer demultiplexers in high speed silicon gate C 2MOS technology. These analog switches are bidirectional and digitally controlled. A built-in level shifting is included to allow them a control input range of up to 6V (peak) for an analog signal with digital control signal of 0 to 6V. VEE supply pin is provided for analog input signals. They have two enable inputs to enable all the switches when high (EN2) or low (EN1). For operation as a digital multiplexer/demultiplexer, VEE is connected to GND. PIN CONNECTION (top view)
HC4351
The HC4351 is a single 8 channel multiplexer demultiplexer having three binary control inputs A, B and C to select 1 of 8 to be turned on, and connected to the output. The HC4352 has a pair of four channel multiplexer demultiplexer having two control inputs A and B that select one of four channel of the two sections. The HC4353 is a triple two channel multiplexer demultiplexer having three separate digital control inputs A, B and C to select independently one of a pair of channles.
HC4352
HC4353
November 1993
1/16
M54/M74HC4351/4352/4353
CHIP CARRIER
HC4351 HC4352 HC4353
PIN DESCRIPTION (HC4351)
PIN No 4 3, 14 7 8 9 11 15, 13, 12 17, 18, 19, 16, 1, 6, 2, 5 10 20 SYMBOL COM NC EN1 EN2 VEE LE A, B, C 0 to 7 GND VCC NAME AND FUNCTION Common Not Connected Enable Input (Active LOW) Enable Input (Active HIGH) Negative Supply Voltage Latch Enable Input (Active LOW) Select Inputs Independent Input/Outputs Ground (0V) Positive Supply Voltage
PIN DESCRIPTION (HC4352)
PIN No 1, 6, 2, 5 3, 14 7 8 9 11 13, 12 16, 18, 19, 15 17, 4 10 20 SYMBOL 0Y to 3Y NC EN1 EN2 V EE LE A, B 0X to 3X X COM Y COM GND VCC NAME AND FUNCTION Independent Input/Outputs Not Connected Enable Input (Active LOW) Enable Input (Active HIGH) Negative Supply Voltage Latch Enable Input (Active LOW) Select Inputs Independent Input/Outputs Common Output/Inputs Ground (0V) Positive Supply Voltage
PIN DESCRIPTION (HC4353)
PIN No 1, 2 5 6, 4 3, 14 7 8 9 11 15, 13, 12 16, 17 18 19 10 20 2/16 SYMBOL 0Y 1Y Z COM 0Z, 1Z NC EN1 EN2 VEE LE A, B, C 0X, 1X X COM Y COM GND VCC NAME AND FUNCTION Independent Input/Outputs Common Output/Inputs Independent Input/Outputs Not Connected Enable Input (Active LOW) Enable Input (Active HIGH) Negative Supply Voltage Latch Enable Input (Active LOW) Select Inputs Independent Input/Outputs Common Output/Inputs Common Output/Inputs Ground (0V) Positive Supply Voltage
M54/M74HC4351/4352/4353
IEC LOGIC SYMBOLS
HC4351 HC4352 HC4353
TRUTH TABLE
CONTROL INPUTS EN1 L L L L L L L L H X EN2 H H H H H H H H X L C* L L L L H H H H X X B L L H H L L H H X X A L H L H L H L H X X HC4351 0 1 2 3 4 5 6 7 NONE NONE "ON" CHANNEL (LE = H) ** HC4352 0X, 0Y 1X, 1Y 2X, 2Y 3X, 3Y ----NONE NONE HC4353 0X, 0Y, 0Z 1X, 0Y, 0Z 0X, 1Y, 0Z 1X, 1Y, 0Z 0X, 0Y, 1Z 1X, 0Y, 1Z 0X, 1Y, 1Z 1X, 1Y, 1Z NONE NONE
X: DON'T CARE *: HC4351/3 only ** When latch Enable is low, the Channel Selection is latched and the Channel Address Latch does not change state.
3/16
M54/M74HC4351/4352/4353
ABSOLUTE MAXIMUM RATINGS
Symbol VCC VCC - VEE VIN VI/O IIK IOK IOUT ICC or IGND PD Tstg TL Supply Voltage Range Supply Voltage Range DC Input Voltage DC Switch I/O Voltage Input Diode Current I/O Diode Current DC Output Current DC VCC or Ground Current Power Dissipation Storage Temperature Lead Temperature (10 sec) Parameter Value -0.5 to +7 -0.5 to 13 -0.5 to VCC + 0.5 VEE - 0.5 to VCC + 0.5 20 20 25 50 500 (*) -65 to +150 300 Unit V V V V mA mA mA mA mW o C
o
C
Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these condition isnotimplied. (*) 500 mW: 65 oC derate to 300 mW by 10mW/oC: 65 oC to 85 oC
RECOMMENDED OPERATING CONDITIONS
Symbol VCC VEE VCC - VEE VIN VI/O Top tr, tf Parameter Supply Voltage Supply Voltage Supply Voltage Input Voltage DC Switch I/O Voltage Operating Temperature: Input Rise and Fall Time M54HC Series M74HC Series VCC = 2 V VCC = 4.5 V VCC = 6 V Value 2 to 6 -6 to 0 2 to 12 0 to VCC VEE to V CC -55 to +125 -40 to +85 0 to 1000 0 to 500 0 to 400 Unit V V V V V
o o
C C
ns
4/16
M54/M74HC4351/4352/4353
DC SPECIFICATIONS
Test Conditions Symbol Parameter VCC (V) 2.0 4.5 6.0 2.0 4.5 6.0 4.5 GND 4.5 6.0 -4.5 -6.0 VIN = VIHC or VILC VI/O = VCC to VEE II/O 2 mA VIN = VIHC or VILC VI/O = VCC or VEE II/O 2 mA VIN = VIHC or VILC VI/O = VCC to VEE II/O 2 mA VOS = VCC or GND VIS = GND or VCC VIN = VILC VOS = VCC or GND VINH = VIHC VIN = V CC or GND VIN = V CC or GND 85 55 50 VEE (V) TA = 25 oC 54HC and 74HC Min. Typ. Max. 1.5 3.15 4.2 0.5 1.35 1.8 180 120 100 Value -40 to 85 oC -55 to 125 oC Unit 74HC 54HC Min. Max. Min. Max. 1.5 3.15 4.2 0.5 1.35 1.8 225 150 125 150 70 50 45 10 5 5 150 100 80 30 12 10 190 125 100 35 15 12 1.5 3.15 4.2 0.5 1.35 1.8 V V
VIHC
High Level Control Input Voltage Low Level Control Input Voltage ON Resistance
V ILC
RON
2.0 GND 4.5 GND 4.5 6.0 RON Difference of ON Resistance Between Switches -4.5 -6.0
4.5 GND 4.5 -4.5 6.0 -6.0
IOFF
Input/Output Leakage Current (SWITCH OFF)
100
1000
nA
6.0
-6.0
IIZ
IIN ICC
Switch Input Leakage Current (SWITCH ON) Control Input Current Quiescent Supply Current
100
1000
nA
6.0
-6.0
6.0 GND 6.0 GND 6.0 -6.0
0.1 4 8
1 40 80
1 80 160
A A
5/16
M54/M74HC4351/4352/4353
AC ELECTRICAL CHARACTERISTICS for HC4351 (C L = 50 pF, Input tr = tf = 6 ns, GND=0V)
Test Conditions Symbol I/O Parameter VCC (V) 2.0 4.5 6.0 4.5 2.0 4.5 6.0 4.5 2.0 4.5 6.0 4.5 2.0 4.5 6.0 4.5 2.0 4.5 6.0 4.5 2.0 4.5 6.0 4.5 2.0 4.5 6.0 4.5 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 5.0 5.0 5.0 VEE (V) GND GND GND -4.5 GND GND GND -4.5 GND GND GND -4.5 GND GND GND -4.5 GND GND GND -4.5 GND GND GND -4.5 GND GND GND -4.5 TA = 25 oC 54HC and 74HC Min. Typ. Max. 25 60 6 12 5 10 4 80 200 20 40 16 34 18 80 225 22 45 17 38 18 75 225 22 45 16 38 17 120 275 38 55 33 47 30 120 275 40 55 35 47 34 120 290 40 58 35 49 35 75 15 13 50 10 9 5 5 5 5 10 36 70 7 0.95 23 15 2 Value -40 to 85 oC -55 to 125 oC 74HC 54HC Min. Max. Min. Max. 75 15 13 250 50 43 280 56 48 280 56 48 344 69 59 344 69 59 363 73 61 95 19 16 60 12 11 5 5 5 10 70 15 2 300 60 51 340 68 57 340 68 57 415 83 71 415 83 71 433 87 74 110 22 19 75 15 13 5 5 5 10 70 15 2
Unit
Phase Difference Between Input and Output Output Enable Time (E1, E2 - O) Output Enable Time (LE - I/O) Output Enable Time (A, B, C - I/O) Output Disable Time (E1, E2 - O) Output Disable Time (LE - I/O) Output Disable Time (A, B, C - I/O) Minimum Pulse Width (LE) Minimum Set Up Time Minimum Hold Time Input Capacitance Common Terminal Capacitance Switch Terminal Capacitance Feed Through Capacitance Power Dissipation Capacitance
ns
tPZL tPZH
RL = 1K
ns
tPZL tPZH
RL = 1K
ns
tPZL tPZH
RL = 1K
ns
tPLZ tPHZ
RL = 1K
ns
tPLZ tPHZ
RL = 1K
ns
tPLZ tPHZ
RL = 1K
ns
tW(H)
ns
ts
ns
th
ns pF pF pF pF pF
CIN CIS COS CIOS CPD (*)
-5.0 -5.0 -5.0
5.0 GND
(*) CPD is defined as the value of the IC's internal equivalent capacitance which is calculated from the operating current consumption without load. (Refer to Test Circuit). Average operting current can be obtained by the following equation. ICC(opr) = CPD *VCC *fIN + ICC
6/16
M54/M74HC4351/4352/4353
AC ELECTRICAL CHARACTERISTICS for HC4352 (C L = 50 pF, Input tr = tf = 6 ns, GND=0V)
Test Conditions Symbol I/O Parameter VCC (V) 2.0 4.5 6.0 4.5 2.0 4.5 6.0 4.5 2.0 4.5 6.0 4.5 2.0 4.5 6.0 4.5 2.0 4.5 6.0 4.5 2.0 4.5 6.0 4.5 2.0 4.5 6.0 4.5 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 5.0 5.0 5.0 VEE (V) GND GND GND -4.5 GND GND GND -4.5 GND GND GND -4.5 GND GND GND -4.5 GND GND GND -4.5 GND GND GND -4.5 GND GND GND -4.5 TA = 25 oC 54HC and 74HC Min. Typ. Max. 25 60 6 12 5 10 4 80 200 20 40 16 34 18 80 225 22 45 17 38 18 80 225 22 45 16 38 17 120 275 38 55 33 47 36 160 275 40 55 34 47 32 120 275 40 55 35 47 31 75 15 13 50 10 9 5 5 5 5 10 19 40 7 0.85 34 15 2 Value -40 to 85 oC -55 to 125 oC 74HC 54HC Min. Max. Min. Max. 75 15 13 250 50 43 280 56 48 280 56 48 344 69 59 344 69 59 344 69 59 95 19 16 60 12 11 5 5 5 10 40 15 2 300 60 51 340 68 57 340 68 57 415 83 71 415 83 71 415 83 71 110 22 19 75 15 13 5 5 5 10 40 15 2
Unit
Phase Difference Between Input and Output Output Enable Time (E1, E2 - O) Output Enable Time (LE - I/O) Output Enable Time (A, B, C - I/O) Output Disable Time (E1, E2 - O) Output Disable Time (LE - I/O) Output Disable Time (A, B, C - I/O) Minimum Pulse Width (LE) Minimum Set Up Time Minimum Hold Time Input Capacitance Common Terminal Capacitance Switch Terminal Capacitance Feed Through Capacitance Power Dissipation Capacitance
ns
tPZL tPZH
RL = 1K
ns
tPZL tPZH
RL = 1K
ns
tPZL tPZH
RL = 1K
ns
tPLZ tPHZ
RL = 1K
ns
tPLZ tPHZ
RL = 1K
ns
tPLZ tPHZ
RL = 1K
ns
tW(H)
ns
ts
ns
th
ns pF pF pF pF pF
CIN CIS COS CIOS CPD (*)
-5.0 -5.0 -5.0
5.0 GND
(*) CPD is defined as the value of the IC's internal equivalent capacitance which is calculated from the operating current consumption without load. (Refer to Test Circuit). Average operting current can be obtained by the following equation. ICC(opr) = CPD *VCC *fIN + ICC
7/16
M54/M74HC4351/4352/4353
AC ELECTRICAL CHARACTERISTICS for HC4353 (C L = 50 pF, Input tr = tf = 6 ns, GND=0V)
Test Conditions Symbol I/O Parameter VCC (V) 2.0 4.5 6.0 4.5 2.0 4.5 6.0 4.5 2.0 4.5 6.0 4.5 2.0 4.5 6.0 4.5 2.0 4.5 6.0 4.5 2.0 4.5 6.0 4.5 2.0 4.5 6.0 4.5 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 5.0 5.0 5.0 VEE (V) GND GND GND -4.5 GND GND GND -4.5 GND GND GND -4.5 GND GND GND -4.5 GND GND GND -4.5 GND GND GND -4.5 GND GND GND -4.5 TA = 25 oC 54HC and 74HC Min. Typ. Max. 25 60 6 12 5 10 4 100 200 22 40 18 34 19 110 225 24 45 20 38 18 100 225 22 45 18 38 19 130 290 38 58 32 49 30 140 300 41 60 34 51 37 135 325 42 65 32 55 35 75 15 13 50 10 9 5 5 5 5 10 11 20 7 0.75 10 15 2 Value -40 to 85 oC -55 to 125 oC 74HC 54HC Min. Max. Min. Max. 75 15 13 250 50 43 280 56 48 280 56 48 363 72 61 375 75 64 406 81 69 95 19 16 60 12 11 5 5 5 10 20 15 2 300 60 51 340 68 57 340 68 57 435 87 74 450 90 77
Unit
Phase Difference Between Input and Output Output Enable Time (E1, E2 - O) Output Enable Time (LE - I/O) Output Enable Time (A, B, C - I/O) Output Disable Time (E1, E2 - O) Output Disable Time (LE - I/O) Output Disable Time (A, B, C - I/O) Minimum Pulse Width (LE) Minimum Set Up Time Minimum Hold Time Input Capacitance Common Terminal Capacitance Switch Terminal Capacitance Feed Through Capacitance Power Dissipation Capacitance
ns
tPZL tPZH
RL = 1K
ns
tPZL tPZH
RL = 1K
ns
tPZL tPZH
RL = 1K
ns
tPLZ tPHZ
RL = 1K
ns
tPLZ tPHZ
RL = 1K
ns
tPLZ tPHZ
RL = 1K
100 85 110 22 19 75 15 13 5 5 5 10 20 15 2
ns
tW(H)
ns
ts
ns
th
ns pF pF pF pF pF
CIN CIS COS CIOS CPD (*)
-5.0 -5.0 -5.0
5.0 GND
(*) CPD is defined as the value of the IC's internal equivalent capacitance which is calculated from the operating current consumption without load. (Refer to Test Circuit). Average operting current can be obtained by the following equation. ICC(opr) = CPD *VCC *fIN + ICC
8/16
M54/M74HC4351/4352/4353
ANALOG SWITCH CHARACTERISTICS (GND = 0 V T A = 25 o C)
Test Conditions Symbol Parameter Sine Wave Distortion fMAX Frequency Response (Switch ON) Feedthrough Attenuation (Switch OFF) VCC VEE VIN (V) (V) (Vp-p) 2.25 -2.25 4 4.5 4.5 -4.5 -4.5 8 Adjust fIN voltage to Obtain 0 dBm at VOS. Increase fIN Frequency until dB Meter Reads -3dB CL = 10 pF (*) RL = 50 VIN is centered at (VCC - VEE)/2. Adjust input for 0 dBm RL = 600 CL = 50 pF fIN = 1 MHz sine wave tr = tf = 6ns RL = 600 CL = 50 pF fIN = 1 MHz square wave Adjust VIN to obtain 0dBm at input RL = 600 CL = 50 pF fIN = 1 MHz sine wave Value Unit Typ. fIN = 1 KHz RL = 10 CL = 50 pF 0.025 0.02 200 -50 -50 -50 110 225 310 -50 -50 -50 dB mV %
MHz
2.25 -2.25 4.5 -4.5 6 -6
dB
Crosstalk 2.25 -2.25 Control to switch 4.5 -4.5 6.0 Crosstalk Between any two switches -6.0 2.25 -2.25 4.5 -4.5 6 -6
(*): Input COMMON Terminal, and measured at SWITCH Terminal. NOTE: These characteristics are determined by design of devices.
9/16
M54/M74HC4351/4352/4353
SWITCHING CHARACTERISTICS TEST CIRCUIT tPLZ, tPHZ, tPZL, tPZH. CROSSTALK (control to output)
BANDWIDTH AND FEEDTHROUGH ATTENUATION
CROSSTALK BETWEEN ANY TWO SWITCHES
GND (VSS)
CI-O CI/O
GND (VSS)
10/16
M54/M74HC4351/4352/4353
SWITCHING CHARACTERISTICS TEST WAVEFORM
tPLZ, tPHZ, tPZL, tPZH.
ts, th, tw
CHANNEL RESISTANCE (RON)
I CC (Opr.)
11/16
M54/M74HC4351/4352/4353
Plastic DIP20 (0.25) MECHANICAL DATA
mm MIN. a1 B b b1 D E e e3 F I L Z 3.3 1.34 8.5 2.54 22.86 7.1 3.93 0.130 0.053 0.254 1.39 0.45 0.25 25.4 0.335 0.100 0.900 0.280 0.155 1.65 TYP. MAX. MIN. 0.010 0.055 0.018 0.010 1.000 0.065 inch TYP. MAX.
DIM.
P001J
12/16
M54/M74HC4351/4352/4353
Ceramic DIP20 MECHANICAL DATA
mm MIN. A B D E e3 F G I L M N1 P Q 7.9 2.29 0.4 1.27 0.22 0.51 0.5 22.86 2.79 0.55 1.52 0.31 1.27 0.090 0.016 0.050 0.009 0.020 3.3 1.78 0.020 0.900 0.110 0.022 0.060 0.012 0.050 TYP. MAX. 25 7.8 0.130 0.070 MIN. inch TYP. MAX. 0.984 0.307
DIM.
4 (min.), 15 (max.) 8.13 5.71 0.311 0.320 0.225
P057H
13/16
M54/M74HC4351/4352/4353
SO20 MECHANICAL DATA
DIM. MIN. A a1 a2 b b1 C c1 D E e e3 F L M S 7.40 0.50 12.60 10.00 1.27 11.43 7.60 1.27 0.75 8 (max.) 0.291 0.19 13.00 10.65 0.35 0.23 0.50 45 (typ.) 0.496 0.393 0.050 0.450 0.299 0.050 0.029 0.512 0.419 0.10 mm TYP. MAX. 2.65 0.20 2.45 0.49 0.32 0.013 0.009 0.020 0.004 MIN. inch TYP. MAX. 0.104 0.007 0.096 0.019 0.012
P013L
14/16
M54/M74HC4351/4352/4353
PLCC20 MECHANICAL DATA
mm MIN. A B D d1 d2 E e e3 F G M M1 1.27 1.14 7.37 1.27 5.08 0.38 0.101 0.050 0.045 9.78 8.89 4.2 2.54 0.56 8.38 0.290 0.050 0.200 0.015 0.004 TYP. MAX. 10.03 9.04 4.57 MIN. 0.385 0.350 0.165 0.100 0.022 0.330 inch TYP. MAX. 0.395 0.356 0.180
DIM.
P027A
15/16
M54/M74HC4351/4352/4353
Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsability for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may results from its use. No license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. SGS-THOMSON Microelectronics products are not authorized for use ascritical components in life support devices or systems without express written approval of SGS-THOMSON Microelectonics. (c) 1994 SGS-THOMSON Microelectronics - All Rights Reserved SGS-THOMSON Microelectronics GROUP OF COMPANIES Australia - Brazil - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Netherlands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A
16/16

▲Up To Search▲

Price & Availability of M54HC4351

	To Download M54HC4351 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .